OLKLIN-ID
(LIQUID SOAP-IODOPHOR) |
|
 |
Introduction :- |
|
| "To maintain hygiene and sanitizing in dairy like industries is the main purpose of using OLKLIN-ID.” |
|
|
Active ingredient of OLKLIN-ID :- |
|
| The product contains |
: |
Titrable iodine (technical) 1.6% w/v. |
| |
|
Condensed alkyl phenoxy polyethoxy ethanol (technical) and Phosphoric acid (technical) 6% w/v |
|
|
Physical properties of OLKLIN-ID :- |
|
| Property |
OLKLIN-ID |
State |
Viscous liquid |
PH |
2.0 |
Density@25ºc |
1.3 ±0.2 |
Color |
Dark brown |
Odor |
Pungent |
|
|
Direction for use :- |
|
| OLKLIN-ID is a highly concentrated and only ½-1% solution in cold or lukewarm water may be used as general purpose cleaning (5-10 ml of OLKLIN-ID in 1 liter of water). This use solution will contain 75-150ppm of available iodine (technical). The fading of its color while using means its property is used up. The surface or article to be cleaned should be in thorough contact with the solution for about five minutes. |
|
|
FOR EXTERNAL USE ONLY-TO BE DILUTED BEFORE USE :- |
|
| CAUTION: Contact of OLKLIN-ID concentrate with skin and eyes should be avoided. In case of contact, flush skin or eyes with plenty of water. Soaps and other alkaline type cleaners should not be used with the solution. |
|
|
Storage :- |
|
| Keep container well-stoppered in a cool and dark place away from direct sunlight. |
|
|
Packing :- |
|
| 5 to 200 liter HDPE carboys. |
