| OLKLIN-AC-4
(ALGAECIDE) |
|
| Introduction :- |
“To inhibit / control green and other algae / bacteria / fungi is the main purpose ofusing OLKLIN –AC-4.” These troublesome microbiological growths can cause number of problems such as plugging of pipelines and equipments, reduced cooling capacity, corrosion etc. These problems can be nullified by our product OLKLIN-AC-4, which is broad-spectrum algaecide / biocide, effective over a broad pH range and can be used along with other water treatment chemicals. |
|
| Contents of the OLKLIN-AC-4 :- |
It contains phenols and salts thereof as well as chlorides, low foaming surfactants and corrosion inhibitors, which are known for its effectiveness on the microbes. |
|
| ADVANTAGES OF USING OLKLIN-AC-4 :- |
- Effectively controls algae formation.
- Prevents slipperiness.
- Prevents development of bad fouling odor.
- Inhibits chloramines formation.
- Inhibits hazardous bacterial growth.
- Improves cooling tower capacity, cooling capacity.
|
| DIRECTION FOR USE :- |
Depending on the algal growth OLKLIN-AC-4 should be applied continuously to the system for three days to destroy existing algae. (If Algal growth is much, it isbetter to remove the growth manually before treatment for better result. After that our system engineer will recommend the optimum weekly dose. |
|
| STORAGE :- |
Store the product in a cool and dry place away from direct sunlight. |
|
| Packing :- |
The product is available in 5 to 200 kg HDPE carboys. |
|
| Safety precautions :- |
Before handling the product, refer material safety data sheet which contains detailed information about this product (available on request). |
